CCNA实验–NAT和PAT的配置2
方法二：动态NAT KC-R1(config)# ip nat pool kachy 173.16.1.58 173.16.1.126 netmask 255.255.255.0 #创建地址池KC-R1(config)#access-list 1 permit 10.1.1.0 0.0.0.255 #创建ACL
KC-R1(config)#ip nat inside source list 1 pool kachy #二者关联
KC-R1(config)#exit
Ping测试
PC-1#ping 202.101.1.149 #测试证明能通
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 202.101.1.149, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 96/125/148 ms
PC-1#telnet 202.101.1.149 #测试证明能远程连接
Trying 202.101.1.149 … Open
Password required, but none set
此时PC-2也可以ping通，telnet上。
查看当前KC-R1的NAT表。
KC-R1#sh ip nat translations #查看NAT表
Pro Inside global Inside local Outside local Outside global
— 173.16.1.58 10.1.1.1 — —
— 173.16.1.59 10.1.1.2 — —
KC-R1#
页:
[1]